兰大首页 日常安排 English

彭鹏

【来源:物理学院 | 发布日期:2013-12-06 | 作者:null 】     【选择字号:

彭鹏 简历

 兰州大学,物理科学与技术学院,副教授

联系方式:pengp@lzu.edu.cn18215160122

 

教育经历:

2009/09-2013/07,哈尔滨工业大学,材料科学与工程学院,博士,导师:傅恒志院士(原西工大校长),郭景杰教授

2007/09-2009/07,哈尔滨工业大学,材料科学与工程学院,硕士,导师:郭景杰教授

2003/09-2007/07,哈尔滨工业大学,材料科学与工程学院,学士,导师:郭景杰教授

科研与学术工作经历:

2016/05-至今,兰州大学,物理科学与技术学院,副教授

2013/07-2016/04,兰州大学,物理科学与技术学院,讲师

主要从事材料的制备及性能等方面的工作,专注基本科研理论与实际材料性能和生产及经济需求的结合。主要关注金属凝固理论与实际应用,Sn-Ni-CoSn-Cu等合金的凝固及熔化行为以及TiAl合金及Ni基高温合金的凝固行为。

国内主要合作者:

1.哈尔滨工业大学傅恒志院士,郭景杰教授,苏彦庆教授(哈工大材料院副院长,国家杰青、长江学者)

2.大连理工大学王同敏教授(大连理工大学材料院书记,国家杰青、长江学者)

3. 西北工业大学刘林教授(原科技处处长)

主要研究方向:

1. TiAl航空结构材料的凝固及熔化行为;

2. Sn-Ni-Co基无铅焊料的凝固组织演化;

3. 定向凝固Ni高温合金竞争生长及组织控制(合作者:西北工业大学刘林教授(高温合金制备两机叶片);

4. 磁性金属材料(Nd-Fe-BSm-Co合金)的凝固制备。

进入兰州大学工作以来,牵头负责的科研项目及科研成果包括:

主持或参加科研项目(课题)情况:

12018年教育部装备预研基金:80万,在研。

2)国家自然科学基金:5150108224万,在研。

32016年兰州市城关区科技项目:2016-4-36万,在研。

4)钎焊材料与技术国家重点实验室课题:2万,在研。

52016年中央高校基本科研业务费:8万,在研。

62016年河南省科技开放合作项目:16210600001915万,结题。

7)省部共建有色金属先进加工与再利用国家重点实验室基金:SKLAB-0029万,结题。

8)凝固技术国家重点实验室课题:17-BZ-2015 10万,结题。

9)凝固技术国家重点实验室课题:SKLSP2014163万,结题。

10)甘肃省自然科学基金:145RJYA2402万,结题。

112014年中央高校基本科研业务费:5万,结题。

12)国家自然科学基金青年项目:6140508225万元,在研,参与。

工作以来所发表论文成果(按时间倒序排序):

共计Sci二区及以上顶级期刊20余篇。

(1) Peng Peng*, Xinzhong Li, Yanqing Su, Jingjie Guo, Migration of liquid phase from the primary/peritectic interface in a temperature gradient, Applied Physics Letters, 2016, 109: 021603-1-021603-4.
(2) Peng Peng*, Xinzhong Li, Jiangong Li, Yanqing Su, Jingjie Guo, On oscillatory microstructure during cellular growth of directionally solidified Sn–36at.%Ni peritectic alloy, Scientific Reports, 2016, 6: 24315-1-24315-11.
(3) Peng Peng*, Xinzhong Li, Jiangong Li, Novel morphologies of intermetallic phases in Sn-Ni peritectic alloys, Materials Letters, 2017, 200: 31-34.
(4) Peng Peng*, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, On migration of primary/peritectic interface during interrupted directional solidification of Sn-Ni peritectic alloy, Scientific Reports, 2016, 6: 24512-1-24512-9.
(5) Peng Peng*, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, On migration of primary/peritectic interface during interrupted directional solidification of Sn-Ni peritectic alloy, Scientific Reports, 2016, 6: 27682-1-27682-12.
(6) Peng Peng*, Influence of thermal stabilization on microstructure at the solid/liquid interface in a directionally solidified Sn-Ni peritectic alloy, Journal of Alloys and Compounds, 2016, 693: 799-807.
(8) Peng Peng*, Xinzhong Li, Jiangong Li, JianGong,Morphology evolution of the interface between different mushy zones of a Sn-Ni peritectic alloy in a temperature gradient, Materials Letters, 2016, 172: 157-161.
(9) Peng Peng*, Precipitation of Sn phase from stoichiometric intermetallic compound in Sn-40at%Mn peritectic alloy, Materials Letters, 2016, 182: 110-113.
(10) Peng Peng*,Xinzhong Li, Yanqing Su, Jingjie Guo, Response of primary dendrite distribution to deceleration growth conditions in a Sn-Ni peritectic alloy, Materials Chemistry and Physics, 2016, 177: 496-504.
(11) Peng Peng*, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, Microsegregation of peritectic systems in a temperature gradient: Analysis in directionally solidified Sn-36at.%Niperitectic alloy, International Journal of Heat and Mass Transfer, 2015, 94: 488-497.
(12) Peng Peng*, Xinzhong Li, Jiangong Li, Yanqing Su, Influence of solutal convection on solute distribution of melt during preparation of directionally solidified Sn-36at.%Ni peritectic alloy, International Journal of Heat and Mass Transfer, 2015, 84: 73-79.
(13) Peng Peng*, Jieren Yang, Xinzhong Li, Yanqing Su, Jingjie Guo, Hengzhi Fu, Composition-dependent phase substitution in directionally solidified Sn-22at.%Ni peritectic alloy, Journal of Materials Science, 2015, 51: 1512-1521.
(14) Peng Peng*, Xinzhong Li, Yanqing Su, Jiangong Li, Dependence of microhardness on solidification processing parameters and dendritic spacing in directionally solidified Sn–Ni peritectic alloys, Journal of Alloys and Compounds, 2014, 618: 49-55.
(15) Peng Peng*, Xinzhong Li, Jiangong Li, Yanqing Su, On melt concentration at the solid/liquid interface during preparation of directionally solidified Sn–36 at.%Ni peritectic alloy, Fluid Phase Equilibria, 2014, 387: 73-80.
(16) Peng Peng*, Yanqing Su, Xinzhong Li, Jiangong Li, Microstructural length scales in directionally solidified Sn-40 at.%Mn peritectic alloy containing intermetallic compounds, Intermetallics, 2014, 55: 73-79.
(17) Peng Peng, Xinzhong Li, Dongmei Liu, Yanqing Su, Secondary dendrite arm migration caused by temperature gradient zone melting in directionally solidified Sn–40at.%Mn peritectic alloy, Journal of Materials Research, 2013, 28: 1196-1202.
(18) Peng Peng, Xinzhong Li, Dongmei Liu, Yanqing Su, Primary dendrite distribution in directionally solidified Sn-36at.%Ni peritectic alloy, Journal of Materials Research, 2012, 28: 740-746.
(19) Peng Peng, Xinzhong Li, Dongmei Liu, Yanqing Su, Effect of peritectic reaction on the migration of secondary dendrite arms in the presence of tertiary dendrites: analysis of a directionally solidified Sn-36at.%Ni peritectic alloy, Journal of Materials Science, 2012, 48: 2608-2617.
(20) Peng Peng, Xinzhong Li, Yanqing Su, Dongmei Liu, Effect of peritectic reaction on dendrite coarsening in directionally solidified Sn-36at.%Ni alloy solidification, Journal of Materials Science, 2012, 47: 6108-6117.
(21) 彭鹏, 李新中*,苏彦庆, 刘冬梅,郭景杰, 傅恒志. 定向凝固Al-12%Ni过共晶合金组织演化. 金属学报. 49(3): 311-319, 2013.
(22) Peng Peng, XinZhong Li*, DongMei Liu, YanQing Su, JingJie Guo, HengZhi Fu. Characterization of microstructural length in directionally solidified Sn-36at.%Ni peritectic alloy. Trans.Nonferrous Met. Soc. China. 23(8): 2446-2453, 2013.
(23) 彭鹏*, 李新中,苏彦庆, 李建功,刘冬梅,郭景杰, 傅恒志. 定向凝固Sn-22Ni包晶合金静态糊状区间界面演化. 特种铸造及有色合金. 2013年年会专刊: 87-91, 2013.
(24) XinZhong Li*, Peng Peng, YanQing Su, DongMei Liu, Dendrite coarsening in directionally solidified Sn–36at.%Ni peritectic alloy in the presence of the migration of secondary dendrite arms,Materials Chemistry and Physics, 2014, 145:203~212.
(25) DongMei Liu*, XinZhong Li, YanQing Su, Peng Peng, Secondary dendrite arm migration caused by temperature gradient zone melting during peritectic solidification, Acta Materialia, 2012, 60: 2679-2688.

热诚欢迎同学们,特别是对于金属材料的制备及应用感兴趣的同学报考,提供较好的待遇,与国内金属材料领域优势学科有诸多合作,方便推荐至哈尔滨工业大学,大连理工大学,西北工业大学等学校材料学科读博。